Kitchen front materials: wood, laminate, lacquer… which one to choose?
Matt lacquer, laminate, Soft Touch, oak or walnut veneer, metal, fluted glass: what each material brings, what it needs day to day and what it costs, so you can choose the fronts for your IKEA kitchen with confidence.
By Eloi, Bocklip · Updated on 7 October 2026
IN SHORT
Which material should you choose for your kitchen fronts?
There is no perfect material: it all depends on how the room is used and the look you want. Here is our short answer.
- For a busy kitchen: satin matt laminate or Soft Touch, the most impact-resistant and the easiest to clean.
- For colour: matt lacquer, with 28 shades in our colour chart and any NCS or RAL reference on request.
- For the warmth of wood: oak or walnut veneer, smooth, brushed or fluted.
- For a statement room: metal (brass, stainless steel, bronze), gloss lacquer or fluted glass.
Good to know
All our fronts are made on an MDF board. It is the surface (lacquer, laminate, veneer or metal) that sets the look, the durability and the price.
VIDEO
Wood, lacquer or laminate?
THE MATERIALS
Bocklip's 9 finishes at a glance
For each material: a real project, its colours, its strengths, what you need to know and the price of a 60 × 80 cm METOD door in the Pure shape, as shown on bocklip.com on 7 October 2026.
Matt lacquer
Strengths: every shape, from Pure to Fluted
Good to know: shows knocks more easily than laminate
Price: €158.76
Satin matt laminate
Strengths: high-density laminate made in France, resists knocks and scouring pads
Good to know: Pure shape only
Price: €162.76
Soft Touch
Strengths: fingerprint-resistant, very robust, edges in the same colour
Good to know: Pure shape only, white back except 3 colours
Price: €259.87
Gloss lacquer
Strengths: very elegant with marble, travertine or dark wood
Good to know: reflections show marks more
Price: €207.90
Smooth wood
Strengths: real wood, each batch comes from a single log
Good to know: order in one go to avoid shade differences
Price: from €182.70
Brushed wood
Strengths: a texture you can see and feel, 18 mm thick
Good to know: Pure, Moderne and Fluted shapes
Price: €297.16
Fluted
Strengths: the signature shape for an island or a bathroom
Good to know: longer machining, so more expensive
Price: €388.50 in wood
Metal
Strengths: French aluminium sheet on MDF, very graphic
Good to know: Pure shape only
Price: €253.06
Fluted glass
Strengths: gives a glimpse inside wall units
Good to know: for METOD (IKEA) and DELINIA (Leroy Merlin)
Price: depends on the size, see the online estimate
PROJECTS
These materials in our customers' kitchens
WOOD
Solid wood or veneer: what you need to know
Solid wood is rare on kitchen fronts: a solid board moves with humidity and heat, and a large door can warp. Most makers, including us, therefore use veneer: a thin sheet of real wood bonded to a stable board.
- It is real wood: our veneers are oak or walnut, with their natural grain and shades.
- Both faces are veneered: the back of our wooden fronts is also oak veneer.
- An even shade: each batch of sheets comes from a single log. Order in one go to avoid differences.
- Sustainably managed wood: our partner sawmills are certified.
Three looks are available: smooth, brushed or fluted.
LACQUER, LAMINATE OR SOFT TOUCH
Which finish for a busy kitchen?
Lacquer, laminate and Soft Touch all give a smooth surface, but they do not behave the same way day to day.
- Matt lacquer is spray-applied in a paint booth in our workshop. It offers the widest choice of colours and every shape. On the other hand, it shows knocks more easily.
- Satin matt laminate, our Timeless range, is a high-density laminate made in France. It takes knocks and the green side of a sponge: ideal for base units and families.
- Soft Touch is soft to the touch and does not keep fingerprints. It is made in our workshops in France and is very robust.
Our advice: nothing stops you mixing. A hard-wearing finish for base units, lacquer or wood for wall units and the island.
SIGNATURE FINISHES
Fluted, curved sides, metal, fluted glass: what makes the difference
- Fluted: half-cylinders set edge to edge, in matt lacquer or brushed wood. Perfect for cladding an island or a bathroom unit.
- Curved sides: rounded sides that soften the end of an island or a run of units. Allow an extra 10 cm, the radius of the curve.
- Metal: brushed brass, stainless steel or bronze, for a graphic touch on an island or a tall unit.
- Gloss lacquer: 5 deep shades to pair with marble, travertine or dark wood.
- Fluted glass: a slim 19 mm frame with reeded glass for wall units. The frame comes in all our wood and lacquer colours.
BY ROOM
Which material for which room?
Kitchen
Wall units and island: matt lacquer, wood or fluted, for style.
In every case: never leave standing water on the fronts.
Bathroom
Fluted and wood warm up a vanity unit.
Ventilate the room and wipe off splashes.
Wardrobe and living room
Wood or lacquer for a PAX wardrobe or a BESTÅ unit matching the kitchen.
Metal or gloss lacquer for a statement piece.
SEE AND TOUCH
Choose in person rather than on screen
A colour, a veneer or a brushed finish is easier to judge in real life than in a photo, especially under the light of your own kitchen.
- Samples: the first 3 are free, then €2.90 each (€5.90 for fluted). A complete box with every finish and colour costs €180.
- Showrooms: come and see our materials in Saint-Cloud, Paris and Lyon.
- Discovery appointment: free, in a showroom or by video.
FAQ
Your questions about front materials
High-density laminate. Our satin matt range resists knocks and the green side of a sponge. Soft Touch is also very robust and does not keep fingerprints.
Yes. Our wooden fronts are natural oak or walnut veneer bonded to an MDF board. The back is also oak veneer.
Lacquer for the choice of colours and shapes, laminate for everyday durability. Prices are close: €158.76 in matt lacquer and €162.76 in satin matt for a 60 × 80 cm door.
Yes, in matt lacquer: give us an NCS or RAL reference. This option has an extra cost.
A damp cloth and non-abrasive soap are enough, then dry straight away. Never leave standing water on the fronts.
We offer a limited two-year warranty against manufacturing defects.