F.A.Q

Here you will find the most frequently asked questions

Bocklip Fronts and Sides

We manufacture fronts and sides for the following furniture:

  • METOD and FAKTUM kitchens (last series 2008/2009) from Ikea
  • DELINIA ID kitchen furniture purchased from 2019 from Leroy Merlin
  • PAX wardrobes from IKEA
  • EVO’M from Leroy Merlin
  • REMIX bathroom from Leroy Merlin
  • BESTA living room from Ikea

Yes, you only purchase the cabinets with the hinges and legs. Also, buy the drawer slides whether it’s from IKEA or LEROY MERLIN.

We are not affiliated or associated with IKEA or LEROY MERLIN. All Bocklip fronts are manufactured to customize IKEA or LEROY MERLIN cabinets.

Yes, all doors and drawer fronts are pre-drilled to the exact specifications of IKEA or LEROY MERLIN.

Orders are shipped by light vehicle during dedicated rounds or by pallet in consolidation.

Use a damp cloth with non-abrasive soap to clean your doors and dry immediately. Never leave standing water on the door surfaces.

The doors are made of raw MDF, covered with high-density laminate, wood veneer, wood panels, or matte lacquer.

We deliver everywhere in France as well as to the following countries: Belgium, Spain, Italy, Luxembourg, Germany, Hungary, Poland, Austria, Netherlands, Portugal (excluding islands). We also organize special deliveries if you wish to install your Bocklip products in remote areas. In this case, please do not hesitate to contact us; we will be pleased to find a solution for you!

Our paint contains a solvent base and varnish. It is of industrial quality, not available for purchase, and must be:

  1. Heated before use,
  2. Applied with professional spray equipment,
  3. Heated again during drying to accelerate/activate the curing process.

 

For these reasons, finding the exact color is unlikely. However, you can come very close by purchasing paint from the NCS references of your choice in any professional paint store.

Because we provide samples and our products are made entirely to order, we cannot accept returns.

No, their doors are entirely their property. We do not copy IKEA or LEROY MERLIN doors.

Absolutely, most of our clients do! Click  here to use the IKEA kitchen planner. Or click here Configure your kitchen in 3D with Leroy Merlin for the Leroy Merlin planner. Once your design is complete, you can send us the full plans with the elevations by email. If you encounter any difficulties:

simply send us your login information – email address and password – and we will work on your plans ourselves.

Sorry, that is not possible. Your order will be delivered directly to your home.

Yes indeed! We are interior design experts. We therefore can read Google Sketch-up, Autocad, and Photoshop files, even if they are sent in PDF or JPEG format.

We grant our customers a period of 48 hours to cancel their order.

Approximately 2 months, depending on materials and the time of year.

Find all our delivery times on our Delivery page.

Click here to learn more about delivery.

We accept any type of payments you might use : credit cards, PayPal, Apple Pay, Klarna, and bank transfers.

Bocklip offers a limited two-year warranty against manufacturing defects. Daily exposures such as heat exposure, water damage, scratches, and discoloration are not included.

Yes, we can provide fronts, but they will not be pre-drilled.

We take special care in packaging.

However, it is important to ensure that your order arrives in good condition.  We ask all customers to check their delivery upon arrival and inform us of any issues within 3 business days. The damage report is essential. You can also take photos if you wish and send them to us by email.

For matte lacquer fronts in Pure, Modern, Classic Pop, and Classic Old shapes, the thickness is 18mm. For matte lacquer fronts in Classic or Pleated shapes, the thickness is 22mm. For matte satin, soft-touch, and metal fronts in the Pure shape, the thickness is 19mm. For smooth wood fronts in Pure and Modern shapes, the thickness is 18mm. For smooth wood fronts in the Classic shape, the thickness is 20mm. For brushed wood fronts in Pure and Modern shapes, the thickness is 18mm. For brushed wood fronts in the Pleated shape, the thickness is 24mm. For sides, the thickness is 19mm.

A side panel is placed on the side of the cabinet to finish the kitchen. It does not replace the side of the IKEA or Leroy Merlin cabinet.

An under-panel is fixed beneath the wall cabinets to cover the undersides of IKEA cabinets.

A filler panel is a panel in the color of your kitchen that fills the gap between the IKEA cabinet and the wall.

Bocklip manufactures custom-sized fronts. Simply send the height and width in millimeters to [email protected]. The maximum height cannot exceed 2400 mm for lacquered finishes and 1800 mm for pleated finishes. The only difference with a custom-sized door is that your front will not be pre-drilled. Orders for custom fronts must be placed through a sales representative and not via the website.

At Bocklip, we know how complicated it can sometimes be to choose a kitchen or a wardrobe. That’s why a team of 10 experts is available to support you throughout your entire project. How to contact them? You have several ways to meet one of our Bocklip experts: • You can visit our showrooms, where in addition to personalized advice, you can admire all our materials, see the colors and shapes. We welcome you without an appointment, but for a more relaxed experience, it is best to book an appointment on our showroom page. • You can book a video call, and several formats are available depending on the stage of your project. To secure a time slot, go to the services page.

METOD: With the Metod furniture structure, you can design kitchen furniture as well as unique pieces such as storage units, wardrobes, dressers, and entryway furniture. This is made possible thanks to the high flexibility offered by the Metod range in terms of structure and drawer positioning. You can also design bathroom furniture using this structure.

PAX: You can use a Pax wardrobe structure to design one or more wardrobes. However, if the sizes in the Pax range do not suit your needs, you can also create wardrobes using the tall cabinet structure from the Metod range.

BESTA: With the Besta furniture structure, you can design a sideboard, a TV unit, or a cabinet. Please note that we do not offer drawer fronts for the Besta structure in our product range.

FAKTUM: The former IKEA kitchen range.

We are very proud of the quality of our woods, and our painting workshops, all located in Europe, are renowned for the quality of their craftsmanship. By ordering a sample, you will be able to see for yourself the grain of the different types of oak, the rich finish of walnut, and the subtle tone of Arabica. When it comes to lacquer colours, we understand how difficult it can be to choose between Seed, Corde, or the various shades of white. Having a sample of each allows you to see if the colour works well with your floor, countertop, or walls. Last but not least, your samples are reimbursed with your first order of façades.

For all international orders to Switzerland and the United Kingdom, customers may be subject to customs duties once the parcel enters their country. As these fees vary depending on the value of the order, we are unable to determine the exact amount of these taxes in advance.

No worries — we’re here to help! Write to us at [email protected]

MODULE Minéral worktops are manufactured in Europe from glazed volcanic lava sourced from the Volvic volcano in Auvergne, in the heart of the Chaîne des Puys. Glazed lava is a high-quality material produced through a lengthy and technically complex manufacturing process. The worktops in the MODULE Essentiel Céramique range are manufactured in Spain in workshops renowned for their craftsmanship.

MODULE worktops are available in two exceptional materials: enameled volcanic lava (MINERAL) and ceramic (ESSENTIEL). MINERAL Enameled Lava: The lava comes from the Volvic volcano, located in Auvergne, in the heart of the Chaîne des Puys. Formed several thousand years ago through successive lava flows, this volcanic stone is known for its density and natural strength. The enameling process, applied and then fired at very high temperatures, reveals the full richness and depth of the lava. Each shade is named after an iconic volcano, echoing the material’s mineral origin and the landscapes that shaped it. ESSENTIEL Ceramic: The ceramic originates from Spain, a region where it has shaped landscapes and uses for generations. It reflects a unique craftsmanship passed down over time, combining precise techniques, material mastery, and high technical standards. Made from white clay, pressed and fired at high temperatures, it results in a durable and resistant worktop. Each color is inspired by natural stone and the regions that shaped it, reflecting an architectural culture deeply rooted in ceramic craftsmanship.

MODULE is based on a system of standard modules, compatible with IKEA kitchens, which can be adapted to suit the specific requirements of your project. Each worktop is made to order specifically for you: it is designed for your project and therefore cannot be returned.

ESSENTIEL Ceramic: ESSENTIEL Ceramic worktops consist of two 8 mm ceramic slabs, bonded together and hollowed out in the centre to fit over a water-resistant MDF backing. The final thickness of the unit is 1.7 cm. This design creates a subtle, discreet line along the edge of the worktop, corresponding to the joint between the slabs. MINERAL Enamelled Lava: MINERAL Enamelled Lava worktops consist of a single 2 cm-thick slab of enamelled lava, requiring no water-resistant MDF backing.

ESSENTIEL Ceramic: Technical epoxy joints ensure a secure bond between the modules. Designed to be discreet and seamlessly integrated into the worktop’s design, they are finished in a shade that matches the worktop’s colour. Installation is carried out edge-to-edge, with a so-called ‘zero’ joint that is virtually invisible. MINERAL Glazed lava: Technical epoxy joints also ensure the connection between the modules. Discreet and integrated into the worktop’s design, they match its colour and are approximately 3 mm wide.

Delivery times vary depending on the product. Samples: delivered within 3 to 5 working days. MODULE worktops are made to order to avoid overstocking and minimise our environmental impact. Production lead times depend on the materials used, as the manufacturing techniques vary. Each stage (cutting, shaping, drying) requires a specific amount of time to ensure a durable, high-quality finish. MINÉRAL Enamelled lava: 2.5-month lead time ESSENTIEL Ceramic: 2.5-month lead time

The installation process is explained step by step in our instructions and in our detailed videos, which have been specially designed to guide you through the installation of your worktop. You can view them by clicking on the following link: https://bocklip.com/fr/notices-montage-plan-de-travail-module

The MODULE worktop is designed to accommodate a stainless steel sink, which is supplied and must be purchased together with the 4-sink module. As for the mixer tap, you may choose any model you like, provided it is compatible with a standard 35 mm diameter hole.

MODULE Essentiel: a diamond blade is required for any potential cutting. MODULE Minéral: no cutting is possible.

MODULE is based on a modular, compatible system that is pre-dimensioned to fit the widths of standard IKEA units, with adjustments possible depending on the project configuration. The modules come with the necessary cut-outs already incorporated, particularly for the sink, mixer tap and hob.

MODULE is offered as part of a complete kitchen project, but can also be purchased separately to equip an existing kitchen or a specific project.

MODULE worktops are delivered as modular elements, ready to be assembled on site. This principle allows for a simpler and more controlled installation, without on-site cutting, while adapting to your project configuration.

The MODULE worktop can be installed by the fitter or joiner responsible for fitting the kitchen, provided they have the necessary expertise and tools for installing a stone worktop. The installation process is explained step by step in our detailed installation guides and videos, designed to guide you through the entire process of fitting the worktop.

The hob is sold separately from the MODULE worktop. For Module 5, a Bosch hob is recommended, as it is fully compatible with the cut-outs already provided. It fits easily and conceals the joint between the modules, creating a discreet and seamless finish. The recommended models are the PIE695HC1E for a standard version, and the PVQ890H26E for a model with an integrated hood.

Clean the surface regularly with a clean, dry cloth. Stubborn stains and limescale can be safely removed using household cleaning products (bleach, white vinegar, limescale remover, etc.)

MODULE is a modular worktop system made from ceramic and enamelled lava, pre-cut to fit perfectly with standard cabinet widths available on the market. Designed as a ready-to-install solution, it allows for quick installation, without the need for on-site cutting or the services of a stonemason. Indeed, the modules feature pre-cut openings, specifically for the sink, mixer tap and hob.

Simplify worktop installation Compatible with standard kitchen units Avoid on-site cutting Reduce lead times and unforeseen issues Guarantees a precise and long-lasting finish