IKEA FAKTUM fronts: compatibility and modern alternatives
Your IKEA FAKTUM kitchen is still sturdy, but its fronts have aged and IKEA no longer makes them. How to recognise it, why METOD fronts don't fit, and how to give it a new look without replacing the cabinets.
By Eloi, Bocklip · Updated on 8 October 2026
IN SHORT
A pre-2014 kitchen that can still be renovated
FAKTUM is IKEA's former kitchen range, sold until 2013 and then replaced by METOD. Many of these kitchens are still in use, with cabinets in good condition.
- METOD fronts don't fit: the cabinets have different heights.
- We make fronts in FAKTUM sizes: doors, drawers, side panels, fillers and plinths.
- Almost all our finishes are available, from matt lacquer to fluted wood.
Not sure which model you have?
Our guide to identifying your kitchen helps you recognise a FAKTUM, METOD or DELINIA kitchen in a few minutes.
VIDEO
Don't throw it out, change the fronts
FAKTUM OR METOD
The differences to know
| Criterion | IKEA FAKTUM | IKEA METOD |
|---|---|---|
| On sale | Until 2013 | Since 2014 |
| Base unit height | 70 cm without legs | 80 cm including legs |
| Plinth | About 16 cm, no visible legs | About 8 cm, on adjustable legs |
| Holes inside the cabinets | One row | Two rows |
| New fronts from IKEA | No longer made | Current range |
| Bocklip made-to-measure fronts | Yes, in FAKTUM sizes | Yes, in METOD sizes |
COMPATIBILITY
Why METOD fronts don't fit FAKTUM
A FAKTUM kitchen is built on 70 cm high base units standing on a tall plinth. METOD uses a different grid, with base units of 80 cm including legs. Door and drawer heights therefore don't match: a METOD front would leave a gap or overhang the cabinet.
You need fronts cut to FAKTUM sizes. That is what we make, in actual dimensions: a base unit door measures for example 59.5 × 69.4 cm, a wall unit door 59.5 × 91.8 cm.
OUR SIZES
Everything we make for FAKTUM
- Doors: 29.6 to 59.5 cm wide and 34.2 to 194.2 cm high, including a 44.5 × 69.4 cm dishwasher door.
- Drawers: 29.5 to 79.5 cm wide and 12.6 to 69.4 cm high, plus a 59.5 × 9.4 cm oven trim.
- Lift-up doors: 69.4 or 91.8 cm wide, 39.6 cm high.
- Side panels 12 mm thick, 45 or 65 cm wide, and fillers of 10 or 20 cm.
- Plinth: 220 cm long and 15.8 cm high.
The only exception: curved sides are not available for FAKTUM.
THE FINISHES
The same choice as for a new kitchen
For FAKTUM, we offer the same finishes as for METOD:
- Matt lacquer: our own shades or the NCS chart, in the Pure, Moderne, Classique, Classique Old, Classique Pop and Plissé styles.
- Gloss lacquer, satin matt and Soft Touch, in the Pure style.
- Smooth and brushed wood, in the Pure, Moderne and Classique styles, and fluted wood.
- Metal and fluted glass.
The FAKTUM configurator also lets you design your Module worktop, in ceramic, enamelled lava or quartz.
THE ALTERNATIVES
Three ways to update a FAKTUM kitchen
Replace only the fronts
It is the least disruptive way to get a real change of style.
Repaint the original doors
The result depends heavily on surface preparation.
Switch to a METOD kitchen
You then need to dismantle everything and buy new units.
HOW TO
Order your FAKTUM fronts in 4 steps
- Measure each front of your kitchen, width and height, and write them down in a list.
- Take a photo of the installed kitchen: it helps our team check your list.
- Configure your fronts online, or send us your list for a quote prepared by an expert.
- Fit your fronts: side panels are screwed from inside the cabinet, not glued.
Good to know
We cannot come and measure at your home: your measurements are the basis for manufacturing. Check them twice before ordering, or get help from an expert during a video design appointment.
FAQ
Your questions about FAKTUM fronts
Three clues: a tall plinth of about 16 cm with no visible legs, base units 70 cm high without legs, and a single row of holes inside the cabinets. Our identification guide shows everything in photos.
No. The two ranges have different unit heights, so the fronts don't line up. You need fronts in FAKTUM sizes, like the ones we make.
No. The FAKTUM range has not been produced since 2013: IKEA replaced it with METOD. To keep your cabinets, you need made-to-measure fronts.
The same as for METOD: matt and gloss lacquer, smooth, brushed or fluted wood, satin matt, Soft Touch, metal and fluted glass. Only curved sides are not available. Your first 3 samples are free.
Yes: you only change the fronts. If you also want to replace it, you can design a Module worktop from the FAKTUM configurator.