Made-to-measure IKEA kitchen doors: how to choose the right dimensions

Widths, heights, drawer fronts, dishwasher doors and cover panels: how to read the IKEA METOD grid, measure your kitchen and order made-to-measure doors in the right size.

By Eloi, Bocklip · Updated on 7 October 2026

IN SHORT

The golden rule: follow the METOD grid

A made-to-measure door for an IKEA kitchen is not drawn to the millimetre: it follows the METOD carcass formats. That is what makes it line up with the hinges and the neighbouring fronts.

  • Widths: 20, 25, 30, 40 and 60 cm for doors, up to 80 cm for drawer fronts.
  • Heights: from 40 to 200 cm for doors, in 20 cm steps, and 10, 20 or 40 cm for drawers.
  • Actual dimensions: each front is 3 mm smaller than its format. A 60 × 80 door measures 597 × 797 mm, leaving a gap between two fronts.

Good to know

Measuring an old door and getting 597 × 797 mm? Order the 60 × 80 format. Always go by the carcass format, not the exact size of the front.

VIDEO

The −3 mm rule

THE FORMATS

All available dimensions

Here are the formats available in matt lacquer, Pure shape, as width × height in centimetres. The range may vary depending on material and shape: the configurator shows the sizes available. Prices as shown on bocklip.com on 7 October 2026.

Doors

Widths: 20, 25, 30, 40 and 60 cm
Heights: from 40 to 200 cm in 40 and 60 cm widths, 60 or 80 cm for narrow widths
Price: €158.76 for a 60 × 80 door in Pure matt lacquer

Drawer fronts

Widths: 40, 60 and 80 cm
Heights: 10, 20 and 40 cm
Price: €66.16 for a 60 × 20 front in Pure matt lacquer

Cover panels

Use: dress visible carcass sides and fillers
Widths: 10, 20, 39 and 62 cm
Heights: from 40 to 240 cm
Price: €126.79 for a 62 × 80 panel in Pure matt lacquer

Special formats

Formats: dishwasher doors 45 × 80 and 60 × 80, not pre-drilled; spice rack doors 20 × 80 and 30 × 80; 8 cm high plinths; curved sides
Price: €141.12 for a 60 × 80 dishwasher door in Pure matt lacquer
IKEA kitchen with made-to-measure fronts: tall units, doors and drawers in several formats

HOW IT WORKS

Take your measurements in 5 steps

  1. Identify your kitchen: our METOD formats apply to IKEA METOD kitchens. For another range, check compatibility first.
  2. Carcass by carcass, note the width and height, then how the fronts are split: one door, two drawers, a door and a drawer...
  3. Spot the visible sides at the end of a run, the fillers and the plinths: these are your cover panels.
  4. Note the opening side of each door and where integrated appliances, such as the dishwasher, sit.
  5. Check your list against the IKEA plan, or send it to us: a Bocklip expert will reply within 48 hours with a quote.

Tip: an old front measures 3 mm less than its format. Always round to the nearest METOD format.

CUSTOM SIZES

What if your size does not exist?

An alcove, an uneven wall, a special layout: some kitchens fall outside the METOD grid. In that case, we also make fronts to exact dimensions.

  • Send us the width and height in millimetres via our contact page.
  • Maximum height: 2,400 mm in lacquer and 1,800 mm in fluted.
  • Colour on request: we can also make your fronts in the RAL colour of your choice.

To have your measurements checked, book a design appointment: 1.5 hours by video with an expert who draws up your plan, your Bocklip quote and your shopping list, for €45.

IKEA kitchen in brushed arabica oak with an island

FAQ

Your questions about IKEA door sizes

METOD doors come 20, 25, 30, 40 and 60 cm wide. In 40 and 60 cm widths, they range from 40 to 200 cm high in 20 cm steps. Drawer fronts are 40, 60 or 80 cm wide and 10, 20 or 40 cm high.

Each front is 3 mm smaller than its format to leave an even gap between two fronts. A door sold as 60 × 80 cm therefore measures 597 × 797 mm, and is 18 mm thick.

Measure the width and then the height of the front in millimetres, and round to the nearest METOD format. Also note the opening side of the doors and the position of the hinges.

Yes. We offer dishwasher doors in 45 × 80 and 60 × 80 cm. They are not pre-drilled, as they attach directly to the integrated appliance.

Yes. Send us the width and height in millimetres via our contact page. The maximum height is 2,400 mm in lacquer and 1,800 mm in fluted.

Leroy Merlin DELINIA ID kitchens, bought from 2019 onwards, have their own format grid. See our DELINIA range for the sizes available.

Got your dimensions? Configure your METOD doors.